Well, just got done today tinting the brake light in the cab of my truck. It came out good and the cab lights still light up enough to see the bed. Here are the pictures of the process to do this.
[You must be registered and logged in to see this image.]Above is the before pictures.
Now remove these screws.
[You must be registered and logged in to see this image.]Light removed and laying on my table.
[You must be registered and logged in to see this image.]Time to wet sand it, cause it was covered in scratches and mold from driving under tree limbs.
[You must be registered and logged in to see this image.]Cleaned with alcohol and ready for VHT nightshades spray tint.
[You must be registered and logged in to see this image.]Sprayed 2 coats of VHT nightshades
[You must be registered and logged in to see this image.]Wet sanded before applying clear coat.
[You must be registered and logged in to see this image.]4 coats Clear coat applied.
[You must be registered and logged in to see this image.]Mounted back in the truck.
[You must be registered and logged in to see this image.]